How to maintain the car brake disc


Owners often reflect the brake pads are not wear-resist […]

Owners often reflect the brake pads are not wear-resistant, which is actually belong to the phenomenon of early wear and tear, resulting in this early wear and tear are mainly due to the following aspects.


1, poor quality brake disc or drum material and structure easily lead to brake pads early wear and tear.


2, due to the brake system brake caliper damage caused by long-term use of brake does not return, making the long-term film and plate caused by excessive wear and tear wear extremely serious.


3, the brake pad of the materials used and the brake pad friction layer design density is unreasonable, but also lead to brake pad wear one of the reasons.


4, the original car brake pads small design area, long-term speeding, frequent braking, overload and long-term use of high temperature, but also lead to brake wear and tear of the main reason.


For all the above reasons, it is recommended that you use your car to match the brake products tray, pliers, brake pads. The best time to replace a brake pad Disc brake thickness of the brake pad can be used to check the brake plate approach, and drum brake shoe brake pad thickness check, you must brake shoe pulled from the brake Come out before picking up. However, both the brakes on the disc brakes and the brakes on the drum brakes must be specified by the manufacturer to a thickness of not less than 1.2 mm because, as a result of all the actual measurements, the brakes wear and flake before or after 1.2 mm Faster. Therefore, the owner should check and replace the brakes on the brakes at this time or before. For normal vehicles, under normal driving conditions, the service life of the brakes of the front brake is 3-5000 km and that of the brake brakes of the rear brake is 12- 150,000 kilometers.